Primary process: Thermoforming. The full route, materials, tolerances and design tips for an egg carton, with an indicative cost.
ThermoformingPrimary process
PolymerFamily
6Route steps
+/-0.3mmTypical tol.
An egg carton is primarily made by Thermoforming. Thermoforming heats a plastic sheet until pliable and draws it over a mould with vacuum or pressure, trimming the formed part from the sheet. Below is the full route to make an egg carton, the materials it suits, the tolerances to expect and the main design points. The route is free, from the finder.
Step by step
How an egg carton is made
The usual route, raw material to finished part. The amber step is where the egg carton gets its basic shape.
Material
Select the plastic sheet grade and gauge for the egg carton.
Thermoforming
Heat the sheet and draw it over the mould to make the egg carton.
Tooling Low to medium Tolerance ±0.3 to 1.5mm Lead 2 to 8 weeks
Trim
Trim the edges, flash and any waste material.
Secondary
Where the egg carton needs them, add inserts, printed graphics or machined details.
Tooling None Tolerance ±0.125mm, to ±0.025mm Lead 1 to 10 days
Assembly
Where the egg carton joins other parts, snap-fit, weld or bond it into the finished product.
Tooling Low Tolerance good Lead immediate
Inspection
Check fit, finish and any functional dimensions.
Need the real cost for an egg carton? The free route above is yours. Unlock the full dossier to quote and source it.
Where this process typically lands. Tighter is possible with extra operations like grinding, at higher cost.
Materials
Materials for an egg carton
Grade
Why it suits this
ABS/HIPS sheet
Easy to form
PETG
Clear, tough
Polycarbonate
Impact, clarity
Design
Design tips
General pointers. The full design-for-manufacturing list for an egg carton is in the dossier.
Deep draw with sharp corners.Add draft + radii.
Tight tolerance expected.Design loose; it's a forming process.
Cost
What an egg carton should cost
Trays, panels, packaging from heated sheet; low tooling, great for large light parts at low-to-mid volume.
PER-PART COST vs VOLUME
Per-part cost drops as volume spreads tooling and setup over more parts. The exact figures for an egg carton at your volume, in your currency, are in the dossier.
MODEL EST.
$17 to 49per part at 1 off
A rough ballpark only. The dossier gives should-cost at your exact volume and currency, with the full breakdown.
GET THE FULL DOSSIER
Everything you need to quote and source it
The free route above is yours. To actually put a number on an egg carton and buy it well:
Should-cost at your exact volume in 12 currencies, with the material, processing, tooling and overhead breakdown
Who to source from, typical MOQ and lead time, and the exact RFQ checklist to send
A quote checker that tells you if a supplier quote is fair, and the red flags to watch
SistematikWork is a whole IE platform. Past the free finder, there are 41 ready Excel calculators, templates and CAD guides, each built from real coursework and checked against known values.
Manufacturing & OperationsQuality & ReliabilitySupply ChainProject & StatisticsEngineering Career
An egg carton is primarily made by thermoforming. The route is: Material; Thermoforming; Trim; Secondary; Assembly; Inspection.
What does an egg carton cost?
It depends on size, tolerance and volume. As a rough ballpark it starts around $17 to 49 per part at 1 off and falls with quantity. The dossier gives should-cost at your exact volume and currency. A model estimate, not a quote.
What material is an egg carton made from?
Common choices are ABS/HIPS sheet; PETG; Polycarbonate.
What is the main process for an egg carton?
Thermoforming. Trays, blisters, panels, clamshells and aligners at low to medium tooling cost.
See the exact route and should-cost for your part
The free finder maps your part to its process and full route. Pro adds should-cost at your volume, sourcing and an RFQ draft.
