Primary process: Powder Coating. The full route, materials, tolerances and design tips for a gate finish, with an indicative cost.
Powder CoatingPrimary process
SurfaceFamily
5Route steps
A gate finish is primarily made by Powder Coating. Powder coating sprays charged dry powder onto a part, which is then baked so it melts and flows into a tough, even film. Below is the full route to make a gate finish, the materials it suits, the tolerances to expect and the main design points. The route is free, from the finder.
Step by step
How a gate finish is made
The usual route, raw material to finished part. The amber step is where the gate finish gets its basic shape.
Make the part
Form and finish-machine the gate finish to size first.
Tooling None Tolerance ±0.125mm, to ±0.025mm Lead 1 to 10 days
Clean and mask
Clean the surface and mask the areas that must stay bare.
Powder Coating
Apply the powder coating to the gate finish.
Tooling Low Tolerance adds 0.05 to 0.2mm Lead days
Post-finish
Seal, cure or re-grind any surface that changed dimension.
Inspection
Check coating thickness, hardness or adhesion.
Need the real cost for a gate finish? The free route above is yours. Unlock the full dossier to quote and source it.
General pointers. The full design-for-manufacturing list for a gate finish is in the dossier.
Masked fits/threads undefined.Call out masks + hang points.
Hidden recesses (Faraday cage).Open geometry.
Cost
What a gate finish should cost
Durable decorative/protective finish on metal; priced by area and colour runs. Tougher than wet paint, needs line-of-sight.
PER-PART COST vs VOLUME
Per-part cost drops as volume spreads tooling and setup over more parts. The exact figures for a gate finish at your volume, in your currency, are in the dossier.
MODEL EST.
$6.5 to 11per part at 1 off
A rough ballpark only. The dossier gives should-cost at your exact volume and currency, with the full breakdown.
GET THE FULL DOSSIER
Everything you need to quote and source it
The free route above is yours. To actually put a number on a gate finish and buy it well:
Should-cost at your exact volume in 12 currencies, with the material, processing, tooling and overhead breakdown
Who to source from, typical MOQ and lead time, and the exact RFQ checklist to send
A quote checker that tells you if a supplier quote is fair, and the red flags to watch
SistematikWork is a whole IE platform. Past the free finder, there are 41 ready Excel calculators, templates and CAD guides, each built from real coursework and checked against known values.
Manufacturing & OperationsQuality & ReliabilitySupply ChainProject & StatisticsEngineering Career
A gate finish is primarily made by powder coating. The route is: Make the part; Clean and mask; Powder Coating; Post-finish; Inspection.
What does a gate finish cost?
It depends on size, tolerance and volume. As a rough ballpark it starts around $6.5 to 11 per part at 1 off and falls with quantity. The dossier gives should-cost at your exact volume and currency. A model estimate, not a quote.
What material is a gate finish made from?
Common choices are Steel/aluminium parts.
What is the main process for a gate finish?
Powder Coating. Durable, even, coloured finishes on metal parts, tougher than wet paint.
See the exact route and should-cost for your part
The free finder maps your part to its process and full route. Pro adds should-cost at your volume, sourcing and an RFQ draft.
